C & E Expansion Joints

The C Expansion Joint is placed in the Tubing String to allow for pipe contraction or expansion, due to the effects of temperature or pressure. This Expansion Joint is keyed throughout the length of its stroke to allow the transmission of torque through the joint. Expansion Joints come standard with a 3.0m stroke and may be shear pinned throughout their full stroke at one foot intervals.

Both the C and E Expansion Joints are available with several different V-Seal materials to suit almost any application. Manufactured from low alloy steel, in accordance with NACE specification MR-01-75 for H2S service, these Expansion Joints are also available in other materials.

A.P.I. tubing connections are standard on the C and E Expansion Joints, but all common tubing connections are available if ordered in advance.

The E Expansion Joint is a swivel joint type Expansion Joint which will turn freely until fully extended or compressed.

The E and C Expansion Joints are normally run in conjunction with Permanent or Retrievable Production Packers.

Full extension or compression engages a clutch which allows torque to be transmitted through the joint. Incorporation of a locking pin will allow the Expansion Joint to be locked in the fully compressed position while running or retrieving the joint.

Address

Suite 7
4351 – 104 Avenue S. E.
Calgary, Alberta, T2C 5C6, Canada

Telephone / Fax

1.403.252.9230 (T)
1.403.252.9350 (F)

Email

info@protexcis.com