Tubing Tester

The Tubing Tester Sub is designed to allow testing of the tubing string before beginning high pressure treatments, or before setting a Completion Packer.

It may be placed anywhere in the string and is treated like an ordinary Tubing Coupling or Cross Over Sub. When at depth, a Phenolic Ball is pumped down to the Tubing Tester and the tubing presured up to the required test pressure. After testing the ball is reverse circulated out of the tubing and operations carried on as usual.

The Tubing Tester is available for all common tubing sizes.

The Pump Out Plug may be used as a temporary plug to facilitate setting of hydraulic packers. The plug may be manufactured solid or with a hole and ball seat. A ball is dropped into a seat in the Pump Out Plug, and pressure applied on the tubing to set the packers and shear out the seat.

This Pump Out Plug is available in all common tubing sizes and threads, with either a Half Mule Re-Entry Guide down or with a pin down.

Address

Suite 7
4351 – 104 Avenue S. E.
Calgary, Alberta, T2C 5C6, Canada

Telephone / Fax

1.403.252.9230 (T)
1.403.252.9350 (F)

Email

info@protexcis.com